Tag Archives: trail riding

Thinking about the big ride…

The upcoming ride has been much on my mind these past several weeks. Only three weeks left to get everything ready, and stuff is piling up.

My truck is just about back to premium condition. Still have one oil leak to get fixed. I’ll take it back in after next week, when I can spare it for a few days. Otherwise, it’s running well and I’m quite pleased. I’ll have four new tires put on it next week as well. I’ve put over $10,000 into it in the past year, most in the past month. I had the engine rebuilt, new injectors installed, new A/C system installed, new upgraded steering package, new tires, new parking brakes…sheesh!

Just about have the truck and trailer back into shape
Just about have the truck and trailer back into shape

Additionally, I have blown four rear tires on my trailer in the past year, two of them brand new tires. I decided this week to take it in to a shop and have it checked out. Turns out the rear axle is bent.  Not enough to cause abnormal tire wear, but enough to overheat the tires when loaded heavily. They’re replacing it today with torsion half-axles. That should fix the tire issue. Blowing a tire with a fully loaded trailer while driving down the freeway at 70+ miles per hour is a melancholy situation. Another $1700 spent, but at least I won’t be having to buy tires every other time I load up and haul.

Reno, in training with our hard paniers
Reno, in training with our hard paniers

I’ve only had to spend about $1500 this year for gear, though, which has helped. Most of my gear was purchased last year. As you have probably read in my past posts, this year we decided to try a set of hard paniers, so I bought a set of bear-resistant paniers from Outfitter Supply. That was a major purchase. Outside that most of my purchases were smaller items that needed replacing from last year’s ride.

I still need to buy our food and horse feed. I’m talking to a couple places regarding sponsorships or at least a discount on these items. I can use all the help I can get.

Time is flying by. I’m already into scramble mode. May 16, my departure date from Utah, is coming up fast!

Stay Tuned for more!

 

 

Tune-up ride to the Moab, Utah area last month…

Last month Dad and I took a trip down to the Moab, Utah area for a tune-up ride, in preparation for the second leg of our Mexico-to-Canada trip this year. We loaded all four of my horses, three of which will be used on the trip, and hauled from my place in Salem, Utah to Moab. The drive down took us about four hours.

The trip from Salem to Moab is actually an enjoyable drive, for the most part, coming up Spanish Fork Canyon, over Soldier Summit, down Price Canyon, then across some of the most barren desert country in the United States. Once you start heading into the Moab area, though, the scenery becomes spectacular, filled with red sandstone cliffs. You can even see from the highway several prominent natural arches off to the east in Arches National Park.

Blew a trailer tire
Blew a trailer tire

About 20 or so miles north of Moab, we blew a tire on the trailer. Luckily it was right before a nice pullout, where we changed the tire to the spare and limped on into Moab. We bought a couple new trailer tires at Chip’s Grand Tire Pros and they had us back on the road in a jiffy.

We traveled on south of Moab to about five miles, to a 4WD designated trail named “Back of the Rocks”. It is located on the north side of highway 191, south of Moab, just as the highway goes up the hill and turns westerly. There is a sign at the road entrance, but it’s not much. If you get to the Kane Springs area you have gone too far. Sorry I didn’t get a mile marker number.

This trail runs northward up on top of the cliff you passed as you drove south out of Moab. It is an easy ride that even a novice can handle, however there are some pretty spectacular views from up there. The trail runs about 2.5 miles or so and ends, so it’s a ride in and out on the same trail in a couple hours. Keep in mind that it is a multi-use trail, so you can expect to pass a number of off-road vehicles, hikers, bikers, and equines on your way.

Here are a few pictures from Back of the Rocks:

After riding Back of the Rocks, we loaded back up and headed on south about another 30 miles to Lisbon Valley.  We set up camp behind a big red rock my nephews call Turtle Rock. It is located on the east side of Highway 191 at about mile marker 197.25. There is a gate there and a ranch road that leads over behind the rock, where there are corrals. There is no water, so you have to haul your own. Good campsite, though.

The following morning we rode back into the red canyons north and east of camp. I decided to ride my new horse, Reno, who is young and needs some training. Dad rode Jimbo, our mustang. About 3/4 of a mile northeast, down into the dry wash area north of camp, we discovered a cattle watering trough with plenty of fresh, clean water for the horses. From there we made our own trails, as we explored the canyons and hills. We followed one canyon to its end, where we found a little water for the horses. We stopped there to have lunch and rest ourselves and the horses a bit. Later, we followed up a canyon with a creek in the bottom until we figured we had better start back to camp. We did 8.3 miles that day, according to my GPS.

The following day, we headed eastward to explore. It was a little easier riding than the canyons northward. We found a natural arch and climbed our horses up on top of a big, round, sandstone rock. We had an enjoyable day, Dad and I. We wandered around for several hours, putting the horses through a little training, going up and down ledges, over trees, through gulleys, and generally giving them a good workout.

On the way back toward camp, while walking through a dry river bottom with little vegetation and nothing to be concerned about, Ranger, who was ridden by Dad, stepped into a prairie dog hole and sunk up above his knee. He tried to catch himself with his other front, but it too sank, as the fine red sand simply gave way beneath him. Ranger went down onto his forehead, rolling Dad off onto the ground from nearly ground level. Ranger then went on over onto his back, then quickly got back to his feet. Lizzy got excited and began to buck. First time she’s ever bucked with me. She didn’t really have her heart in it, so I rode her out and she calmed down after a short romp. Dad was ok and Ranger was standing head down with his bridle headstall pulled down over his eyes. After a quick check to make sure we still had all our gear and body parts, we remounted and continued our ride.

Here are some pics of the second and third days of riding:

Back at camp we picked up the other two horses and ponied them out to the water trough. We then rode them over to the highway, where there is a large culvert that allows livestock to pass under the highway. I figured this was a good training exercise for the horses. We will have to pass through a narrow tunnel in the bottom of the Grand Canyon on the South Kaibab trail, so I wanted the horses to have at least a little experience with tunnels. The culvert was about 12 feet in diameter and ran for probably 200 feet or so. After a little convincing the first time through, the horses slowly got accustomed to the sounds and darkness. We took them through the tunnel several times until they no longer hesitated, before returning to camp.

We then broke camp and headed home, arriving in the late afternoon, concluding a great couple days of riding and training.

 

Thirty days until I head south to AZ to start the second leg…

I’m sitting here at midnight and can’t seem to get my mind to slow down. I have a thousand thoughts running through my head about the upcoming adventure. There’s a lot to be done in the next thirty days.

Today I received the last piece of horse gear I’m going to buy for the trip. I bought, through Outfitter Supply, a Five Star 1″ wool felt saddle pad with a spine relief cut-out. I like the look of it and have high hopes it will save my Fox Trotter’s back when he starts losing weight during the trip. On the first leg last year, both my Fox Trotters lost weight in the latter part of the trip, causing their spine to contact the underside of the saddle. They both got a sore spot that turned to a calcium deposit from pressure on their spine from the saddle cantle area late in the trip. Hopefully, this saddle pad with the spine relief will alleviate that problem.

I have had a pretty tough schedule this past month, earning money to finance the trip and trying to get in some good rides to start “legging-up” my horses, as well as getting my truck and trailer into road-worthy shape. On the way home from my trip with Dad to Moab a few weeks ago, I blew the engine in my truck. I just got it back this evening with a rebuilt engine, new A/C system, and new injectors. Hopefully it’s ready to go. I actually got it back over a week ago, but it had an oil leak, then on the way home from the trip to Swinging Bridge last week the radiator fan stopped working and I nearly ruined my new engine. I took it back to my mechanic, who got everything squared away and I got it back this evening, hopefully for good.

In the next month I will need to accomplish the following, while keeping up my work and other duties as well:

  • Buy 4 new tires for my pickup
  • Get horses shod
  • Get health inspections on the horses for their travel to Arizona
  • Pay ahead on my DeLorme Explorer account (my GPS unit)
  • Contact news outlets regarding our pack trip
  • Purchase horse and people feed for the trip
  • Get the trailer brakes adjusted and bearings repacked and check front axle
  • Put pockets on Dad’s chinks
  • Make a rifle scabbard
  • Finish documenting the first leg of the trip on the blog!!!
  • Replace latigo and billets on my saddle
  • Replace saddle string on my saddle
  • Check on my hotel reservations in Panguitch
  • Get our trip support arranged arranged for

Yep. Lots to get done.

I’m going to do my best to get the rest of last year’s ride fully documented on the blog before we start the second leg on May 23 this year, so stay tuned.

Picked up a new horse…

I’ve been shopping around for a new horse for the second leg of our Mexico-to-Canada horse pack trip. Those of you who have been following the blog will recall that my Missouri Fox Trotter mare, Lizzy, had some issues on the first leg. Her long-strided, swinging walk caused rub sores on her shoulders, chest, and rump wherever the pack saddle rigging straps rubbed. She was the only horse with this issue. It seems her summer coat of hair is a bit thinner than my other horses. For this reason, I had to keep her under riding saddle more than I wanted, which eventually caused a sore spot on her back as she began to lose weight during the last part of the trip. In the final analysis, while she is my favorite trail horse, she just isn’t the horse for this pack trip.

I was actually shopping for a new mustang, since we had such good luck with Jimbo, and came across a few possibilities, but it seemed that they were either too far away or weren’t broke enough for my needs (I don’t bounce like I used to and just didn’t want to have to deal with breaking a bucker). Then, a couple weeks ago, a horse that wasn’t too far from my locale caught my eye from an ad on KSL Classifieds, out of Heber, Utah. I kept going back to the ad, because I liked the color and build of the horse. Finally, I decided to make a call and go see him.

IMG_1938The ad indicated he was a grade gelding and that his sire was APHA registered. He was 3-1/2 years old, 14 hands, and had a couple months of training. The price was a little higher than I was looking for and he was a bit younger than I wanted, but I decided to take a look anyway.

I invited my good friend, Rob Prody, and we headed up to Heber one afternoon, about an hour’s drive. We took a good look at him and found he was a bit taller than stated in the ad, at about 14.5 hands, I’d guess. He has a nice, stocky build, short back, straight legs, nice chest and rump, and nice large, round hooves. He had a calm and friendly disposition and was easy to catch, although he tried to avoid being haltered. Looking at his teeth, I could see that the last of his baby teeth was about to come out, so his age was about right. The one thing that worried me a little was a quarter-crack on the outside of his right rear hoof. It wasn’t actually opened up, but I could see the line running up to the coronet. I couldn’t see any injury there, though. I also found he didn’t like me messing with his rear hooves too much, and he made a half-hearted attempt to cow-kick me a couple times. I decided not to make the purchase at that time, but told the owners I might call back in a couple weeks.

After missing out on a couple mustangs I wanted to see, and taking a couple weeks off of my horse shopping, for vacation and work, I found my mind returning to this gelding. Once I got home and had time to continue my search, I decided I would call again on this paint gelding and make an offer, before looking at three other horses I had selected to check out. The long and short is that the owner and I came to agreement on the price and agreed on the sale.

After spending an evening digging my horse trailer out of about 18″ of snow down here in Salem, with the help of a neighbor with a fairly large 4wd John Deere tractor, I was able to pick the horse up on Wednesday evening.

I again took Rob up with me, thinking that we’d just pick up the horse, stop somewhere for a dinner, then head home. You know what they say about “best laid plans.” After arriving at the owners’ place, I signed the Bill of Sale they had prepared and handed over the money. After some small talk and getting to know each other a bit, we headed out to catch-up the horse and load him into the trailer. That’s when the owner mentioned the horse had only been in one other horse trailer and they had a tough time loading him. I could feel the warning lights and horns going off in my head. Since I seem to always buy greenbroke horses, I normally don’t pay for them until I have them in the trailer. I had forgotten all about that simple protocol this time.

IMG_1937Well, he was easy enough to catch, and I had just a little trouble getting his halter on, but he lead easily over to the trailer. Due to the situation of the residence and the amount of snow in the drive, I had parked the truck and trailer on the side of the road. I had the emergency flashers going to keep us from getting hit by passing traffic in the dark. So, here we are bringing this greenbroke horse up to the back of my trailer in the dark with the emergency lights flashing and us shining flashlights around. Looking inside that cavernous, dark trailer, he simply said, “Nope! Not going in there!”

Realizing this was not going to be a short, easy project after the first couple of failed attempts, I pulled out a long training lead, hooked one end to his halter ring and passed the other through the tie loop in the front stall. Holding the tail of this rope, I kept pressure on him and coaxed him from inside the trailer, while my helpers attempted to haze him in from the rear. He would get right up to the trailer, then fight and pull back. I just kept the tension on him, allowing it to slip just enough to keep him from hitting his head on the trailer as he fought. My help had to really scramble a couple times to get out of his way. At one point he reared up, turned, and clopped the owner on top of the head with one of his front hooves. Luckily, he had no shoes on and the owner had a sock hat that offered some protection. Nobody, including the horse, got hurt in the process, other than the owner’s knot on the noggin. After close to two hours, the gelding got tired and simply gave up. He hopped into the trailer, I led him into the front stall, shut the divider, and we had him ready to travel. I put some hay in the manger for him and we headed off down the road.

I felt him move around a bit the first mile or so, but when we stopped at a restaurant about three miles away and checked on him he was fine and was settling down. By the time we came out after dinner, he was quite calm and I was comfortable with heading back down Provo Canyon to Salem.

My herd at pasture in Salem
My herd at pasture in Salem

Once back in Salem, at the pasture where the rest of my herd is kept, I opened the loading gate and started to back him out of the trailer. He got one leg out the back, said “Nope!” and hopped back in. After several minutes of failed attempts at coaxing him from in front, I got out of the trailer and gently coaxed him by pulling lead rope from behind, past his legs. Eventually, he came piling out and everything was good.

I led him over to the fence to allow him to meet his new pasture mates. Seeing no strong aggressive moves from him or my other horses, after a few minutes I released him into the pasture. We sat and watched them for about a half hour and it appeared he would be fine and that the other horses weren’t bullying him enough for me to worry. We left him then and headed for home.

I finally had a chance to mess with him a bit this afternoon and to start his orientation and training. Again, even in the large pasture with other horses, he was easy to catch, but made it difficult to get his halter on. We’re going to have to work on that. I curried him a bit, then tried his hooves. He allowed me to lift all his hooves, although he’s a bit spoiled. We’re going to be working on his hooves a lot, until he figures out that it’s not an optional procedure and that he  might as well just relax and let me do it.

IMG_1936I also learned that he doesn’t like his stomach messed with. He narrowly missed me with a good cow-kick today. Had he not tried that half-hearted cow-kick when I first saw him, and had I not acted with caution this time around, he would have got me pretty good. So, we spent a few minutes working on that bad habit with the knotted end of a heavy lead rope. He learns pretty quickly.

Next week I’ll see about saddling him up and give him a bit of a test drive. I also need to take him for a vet check, Coggins test, and brand inspection.

This gelding doesn’t have a mean bone in him, but he’s very spoiled. He’s going to take some work. I think he’ll develop into a fine horse for Dad and me to take on the second leg of our Mexico-to-Canada horse pack trip.

His name is Reno, and I think it fits him. I have four months to get him into shape.

Thanks to Travis and Terra Naffziger, for selling him to me and helping load him on the trailer.

Pack Saddles Review, based on our experience…

Those of you who have been following my blog awhile know that I did quite a bit of research on various configurations of pack saddles before finally settling on the Decker-style Phillips Formfitter pack saddles, from Outfitters Pack Station, for our Mexico-to-Canada horse pack trip. As Dad already had two crossbuck pack saddles, we ended up using my two Deckers with manties and Dad’s two crossbucks with Utah-style paniers. It’s time for my comparison and evaluation.

Crossbuck pack saddle tree
Crossbuck pack saddle tree

To provide a little background, crossbuck pack saddles, sometimes called sawbuck pack saddles, have been used in North America for at least a couple hundred years. They consist of two crossed wooden “crutches”, similar to the way a sawbuck is built, which is where the name comes from (a sawbuck is two crossed beams over which a log is laid to be cut with a saw). Paniers, which are large bags or hard-sided boxes, are hung by straps from the crossbucks. Traditionally, soft paniers, often called “Utah Paniers” were used. These paniers are often covered with a tarp, which is tied in place with a diamond hitch, which improves the water-resistance of the pack and holds items tied on top of the packs.

IMG_1184While hard-sided paniers are available and quite utilitarian, we decided to go the traditional route. That’s what Dad and I have always used and we saw no reason to change. However, during our passage through the Chiricahua mountains, one of the riders who joined us for a few days packed hard paniers on his mule and I was much impressed. In camp, these hard paniers could be converted into seats or tables. I expect I’ll eventually get a set of these and give up on my traditional bent. Also, there are bear-resistant hard paniers available from a number of suppliers, for those areas where they may be required.

Sometime around the turn of the 20th century, a new-style of pack saddle was invented, which is now commonly called the Decker-style pack saddle. The Decker pack saddle, characterized by metal bows, or arches, to which loads are strapped, has proven its usefulness over the past century, due to its versatility. hqdefault One can hang about any kind of load imaginable from a Decker-style pack saddle with a little ingenuity. This style of pack saddle eventually became the standard in the northwestern United States, while the crossbuck has remained king in the southwestern U.S.. Why this is so, I think I discovered during our pack trip and I will discuss that in another post.

2015-04-28 15.35.38
Our mustang, Jimbo, with the mantied load on a Phillips Formfitter pack saddle

For the kind of loads we carried on our pack trip, manties are used to contain the cargo, which are then tied to the Decker pack saddle. Manties are heavy canvas tarps, normally measuring about 7 X 8 feet, in which the cargo is wrapped and tied into a pack. One manty pack is tied to each side of the pack saddle to balance the load. Manties of uneven size and/or weight may be balanced by adjusting the way they are tied to the saddle. While top packs may be tied to these pack saddles, it is not commonly done, however the manties may be tied as large or small as required.  The pack saddles I finally settled on have arches that are made to handle not only manties, but also Utah Paniers.

Phillips Formfitter
Phillips Formfitter

The Phillips Formfitter pack saddle also has other features that attracted me, such as the adjustable-angle saddle bars and the fleece pads attached to the bars. My reasoning for this selection was that the adjustable bars would answer the problem of the different conformations of the several horses on which we intended to use them. Our remuda consisted of two Missouri Fox Trotters, two Quarter Horses, one mustang, and one mule, ranging from 16 hands to 13, all with very different backs among them.

My concerns with regard to this pack saddle were limited to two things: Would the adjustable saddle bars be able to hold the pack loads in place like a solid pack saddle would? And, would the narrow saddle bars, configured similar to a riding saddle’s bars, sufficiently distribute the loads on the horses’ backs, so as to avoid pressure points and saddle sores?

Before the trip, I discussed these and other concerns about the pack saddles with Wade, at Outfitters Pack Station. We also discussed whether double cinchas, such as are commonly used on crossbuck pack saddles, might be better for our trip. I decided to go with the single cincha, since that is the configuration I have seen on most Decker-style pack saddles. I figured that if they proved insufficient, I could order the double cincha rigs at the end of the first leg of our trip. On the Phillips Formfitter, the cincha rigging is changeable by simply unbuckling one and replacing it with the other. Wade also gave me some advice on setting up the rigging to ride properly on the pack animal.

During the first 200 miles or so of our trip, we knew we would be packing feed for the horses, since there is little feed available for grazing along our route in the lower desert areas of Arizona. We decided on Equidine pellets in 50 pound sacks, as it would be easy to pack in manties and to balance as a load. We started our trip with 400 pounds of feed, split among two pack horses, packed in manties on my Phillips Formfitter pack saddles. With the help of friends, we were able to re-supply with feed as needed. The rest of our gear was packed in paniers on Dad’s crossbucks. Our plan was to have two animals under riding saddle, two packed heavy, and two packed light, then rotate every day or so to keep all the horses adequately rested. We also planned for two rest days per week. On the first day, all the animals were packed pretty heavy, but the feed went down at a rate of nearly 120 pounds per day, so the packs lightened up quickly.

I set my pack saddles up according to Wade’s advice, however, both Dad and I felt the 3/4″ wool felt pack saddle pads we had were insufficient for the loads we were packing on the horses. We decided to place a regular saddle pad over top of the pack saddle pad for extra protection for the pack animals’ backs.  As it turned out, that was a mistake with the Phillips Formfitter.

The first day we made approximately 10 miles. In that distance we had to re-settle the decker pack saddles several times. I was beginning to believe I had made a serious mistake in not ordering the double cinchas. By the end of the second day, in which we made over 16 miles, we had stopped and re-settled the Decker pack saddles a number of times. It seemed they would start to turn every several miles, regardless of how well balanced and tied the load was, or how tight the cinch was. We had no such problems with the crossbuck pack saddles, which were padded in the same way.

Saddle sore on the QH Daisy
Saddle sore on the QH Daisy

By the end of the second day, our large, heavy-built Quarter Horse mare had developed a saddle sore high on her withers. After looking at the location of the saddle sore and considering how often we had to re-settle her Decker pack saddle, we determined that we had over-padded the pack saddles, causing them to “woggle” on the horses’ backs. After that, we packed the Phillips Formfitter saddles without the additional saddle pads and had no further problems with the saddles turning or with saddle sores on any of the other horses. After that point, the Formfitter pack saddles stayed in place with the single cincha and performed very satisfactorily. Lesson learned: Do not over-pad with these pack saddles.

Incidentally, we continued to double-pad the crossbuck pack saddles on the mule and one Quarter Horse and had no trouble with the saddles turning or saddle sores.

I was very pleased with the quality and adjustability of the rigging on the Phillips Formfitter pack saddles. I was able to make the saddles fit properly on my 16-hand, tall-withered, short-backed, tall-spined, deep-chested, bony-hind quartered, Missouri Fox Trotter gelding, as well as the 15-hand, long-torso, flat-backed, broad-chested, wide-rumped, Quarter Horse. As for the mustang, he was fairly in-between the other two and we had no trouble at all with fitting the pack saddles to his conformation.

The one horse that had problems with the Phillips Form Fitter rigging was my 4 year-old Missouri Fox Trotter mare. This mare, Lizzy, has a walk to die for under saddle, but it is that same walk that makes her unsuitable as a pack horse. Her long-strided, swinging walking motion caused her to get rub sores from both the breast strap and the breeching, despite the fact that Wade makes those straps with the edges rolled with a light, soft leather. I found Lizzy also got rub sores from my riding saddle breast strap, so it wasn’t the pack saddle rigging at fault, but simply that my mare has such movement in her strides that she simply gets rub sores. Consequently, Lizzy spent more time than anticipated under my riding saddle with the breast strap stowed in the packs. My other Fox Trotter, Ranger, had no such problems and ended up under the pack saddle more than planned.

IMG_0979
On the Fox Trotters, we had to set the spider way up on the croop to avoid rub sores

The one piece of rigging on the Phillips Formfitter saddles that caused problems on both Fox Trotters, was the spider, which is the piece that holds the breeching in place on the croop of the horse. It should ride about half-way between the point of the croop and the horse’s tail. This piece had rubbed deep sores on both my Fox Trotters’ rumps before I noticed it. I had to adjust the spiders so that they rode right on top of the horses’ croop to alleviate the problem.  When adjusted as it is supposed to ride, the motion and conformation of the Fox Trotters caused the front edge of the spider to dig into the hair and subsequently the flesh of the horses. I think this problem could be remedied with a slight re-design of the spider. The spider is made with two layers of heavy leather with fairly sharp edges. I think a fleece pad under the spider, a different shape, or possibly rolled edges like the breast strap and breeching have, would fix the problem. I must say, however, that the only horses that experienced this problem were the Fox Trotters. The Quarter Horse and the mustang had no problem with the spider, or any other part of the rigging, as-is. I intend to design a removable fleece pad for my saddles, for use with my Fox Trotters.

The Packer's Field Manual, by Bob Hoverson
The Packer’s Field Manual, by Bob Hoverson

I used the book “Packer’s Field Manual,” by Bob Hoverson, as a guide for setting up and using my Decker pack saddles. I found his book to be quite complete and useful. I learned to tie up manties quickly and well, using the knots and hitches he shows in the book. I set up each pack saddle with two “sling ropes” of about 28 feet length attached to the front saddle arch with a loop. Each rope runs through the rear hoops and is looped around each pack in a way that suspends it solidly from the saddle arches. The packs are weighed and balanced using a pack scale before loading, however, if one pack ends up slightly larger or heavier, balance can be achieved by setting the heavy pack a little higher on the saddle, thus changing its center of balance and making the load to ride balanced.

2015-03-23 10.04.05Decker-style pack saddles differ from traditional crossbucks not only in the way they are made, but also in the way they are equipped. While our crossbucks were pretty bare and light on rigging, the Phillips Formfitters were heavy on rigging. They also, as do all Decker-style saddles, use a protective canvas and wood shield, known as a “halfbreed” or “Arapajo”, apparently named for one of the men who originally designed and used this type of pack saddle. The halfbreed is a canvas layer that fits over top of the Decker pack saddle and has sideboards of 1 X 4 pine that protect the horse’s sides from the packs and spread the load. This is particularly important when packing items such as lumber, fence posts, or gravel. By the time we finished the first leg of the trip (355 miles), both Fox Trotters and one Quarter Horse were starting to show the beginnings of saddle sores where the side boards rode against their sides from the heavy loads of the feed sacks. The mustang, on the other hand, showed not a single mark…anywhere.

The Phillips Formfitter pack saddle is made with a leather skirt covering the saddle bars, with wool fleece on the underside. This fleece is intended to increase the padding and keep the saddle in place better. In comparison, our crossbuck pack saddles are simply made of wood. For the most part we had no trouble with the Phillips Formfitter staying in place…at least once we learned not to over-pad them, however, on our mustang we had a problem with the saddle pad crawling out from under the pack saddle. We had to stop and reset his saddle at least twice during the trip to move the saddle pad forward. We did not experience this on any other horse.

One of our crossbucks on Honey
One of our crossbucks on Honey

IMG_1357Again, our crossbuck pack saddles were very sparse on rigging. Just a strap for the breast strap and a couple more for the breeching. They were simple to place, rig, load, and remove. They caused no saddle sores on any of the animals, and never threatened to turn and dump a load, despite our mule’s propensity to roll every time we stopped for a rest. We used the crossbucks on both of the two Quarter Horses and the mustang with similar results. Having said that, I must also add that the heaviest load we ever put on the crossbuck pack saddles was about 170 pounds and they often carried under 150, whereas our Phillips Formfitters were often loaded with up to 200 pounds of feed.

One problem we had with Dad’s old pack saddles was the fact that they are both in dire need of having all the leather replaced. Still, they made it through our trip with only one broken strap – a breast strap, which we repaired with a piece of nylon webbing we found along the trail.

Over the 28 days, Dad and I tried to streamline our morning camp-breaking ritual a number of ways, but we found that with four pack animals, and having to pack our camp and make up four manty packs and four paniers, we simply could not do it in less than about four hours. We discovered that packing the paniers was a simple matter of placing things in the bags in a fairly even manner, then weighing each panier with the pack scale and adjusting as necessary, normally a matter of removing an item from the heavy panier and placing it in the light one. Making up manties, on the other hand, was a matter of building two manties at one time, so that we could estimate that each would be fairly equal in size and weight, then wrapping each one and tying it up. Then, after they were completely done, weighing them to make sure the two packs were within one pound or so of each other. If they were significantly different in weight, they were unpacked, adjusted, and repacked. It was easy to balance them when a pack consisted of one or two bags of feed, but when they contained items of camp gear, after the feed was used, then it was a pain. Additionally, tying up the manties is very hard on the hands. The canvas and rope chafed and rubbed my hands to the degree that it became quite painful for about the first two weeks of the trip, until my hands toughened up.

The one thing we found handy about the manties was that we used the canvas tarps as a ground sheet and bed cover (we prefer sleeping out in the open and did not take a tent). By the end of the trip we had decided that for our kind of pack trips, mantying was simply an unnecessary chore. I can see how they would be the way to go for an outfitter with odd-sized items to pack, but for us, it just isn’t practical.

Utah-style paniers on a Phillips Formfitter pack saddle

For the last three days of the trip we decided that we would go with two pack animals and send one crossbuck pack saddle and one Phillips Formfitter home with our two mares. We also decided that mantying packs was a tedious task we could do without. We finished our trip using four paniers, two of which hung on either side of a Phillips Formfitter pack saddle.

In the final analysis, after 355 miles and 28 days on the trail, we learned that while Decker-style packing is very versatile, making up four manties every morning was terribly time-consuming, tedious, and very hard on the hands. Yes, Decker-style packing is versatile, but panier-style packing is much easier and takes less time and effort to pack, unpack, and load on the pack animal. Even with a cover and diamond hitch, the paniers were easier to pack than the manties. Hard paniers would be an even simpler option.

As for my Phillips Formfitter pack saddles, I am pleased with them and they performed well – once we learned the lesson about over-padding them. They are very well made, both with regard to materials and workmanship.  However, I cannot say they out-performed the old traditional crossbuck pack saddles. Though, had we loaded up the crossbucks with the weights with which we loaded the Formfitters at times, things might have been different.

I will continue to use the Phillips Formfitter pack saddles due to their adjustability and versatility, but I will use them with paniers unless it is absolutely necessary to use manties. They will go with us when we start again next spring.  While we had two horses that experienced saddle sores and rub sores, I cannot blame that on the pack saddles and do not believe they are at fault. These saddles allow me to choose between panier packing, with both soft and hard paniers, or to go with manties for odd-shaped loads.

For the type of horse packing Dad and I do, panier packing will remain our standard. Consequently, as far as utility is concerned, it is a wash between the Decker and Crossbuck pack saddles. While the Deckers are definitely more versatile in the ways they can be packed, we will be using them for handling paniers, which the crossbucks are specifically made for and do very well. Knowing what I know now, I would choose a standard crossbuck pack saddle over a standard Decker pack saddle for the kind of packing I do.

As far as the Phillips Formfitters are concerned, the quality of workmanship and materials, and the adjustability of the rigging and saddle bars are important to me and I remain pleased with them. I will use them pretty much as I would use a crossbuck pack saddle in the future, but will still have the added versatility when needed. In my opinion, the price tag of $699 for a fully outfitted Phillips Formfitter pack saddle is an excellent value when compared with prices for other brands and styles of pack saddles similarly outfitted. I expect mine will cover many miles on my pack animals before I hang up my spurs.

IMG_1297

 

 

 

 

 

 

 

Gear Report: Goal Zero Solar Chargers

Goal Zero Nomad 13 and Guide 10
Goal Zero Nomad 13 and Guide 10

Thought I’d take a few minutes this morning to type up a gear report on one of the pieces of gear we took that truly proved its worth and durability on our 355 mile horse pack trip through the rough country of southeastern Arizona:  Our Goal Zero solar chargers.

As you might recall from a previous post, I bought two solar chargers made by Goal Zero – a Guide 10 and a Nomad 13. The Nomad is the larger of the two panels, producing up to 13 watts of electricity, while the Guide 10 produces up to 10.

Goal Zero Guide 10
Goal Zero Guide 10

The reason I bought the Guide 10 to supplement the Nomad was that it comes with a rechargeable battery pack of four AA batteries that can be used as an emergency power source to recharge our other electronic devices when no sunshine is available.

Tough covers and clear plastic protecting the solar cells
Tough covers and clear plastic protecting the solar cells

When I first purchased the chargers I was quite concerned about their durability. They are flat-panel solar panels covered by a tough nylon-canvas material with a clear plastic cover over the solar cells. They both have a zippered pocket on the back, where cords and adapters may be stored. I am pleased to report that these panels have survived the first leg of our trip. 355 miles of the toughest terrain I have ever ridden over.

As I felt I needed to keep these panels accessible at all times, as well as the need to protect them from damage, I kept them in my saddle bags for the entire ride. My original intent was to strap them to the top of our pack saddles, so we could charge batteries and devices as we traveled. However, after our first day out, I let that idea die. We passed under so many low branches of mesquite, ironwood, juniper, ocotillo, and cactus, that I’m pretty sure they would have sustained damage had I tied them to our pack saddles.

My solar panels set out to charge my iphone
My solar panels set out to charge my iphone

What I ended up doing for most of the trip was to set the panels out each morning and evening to catch as much sunshine as possible. Often, we made camp after the sun was low on the horizon, so I didn’t get a lot of charging done in the evenings, but I generally got several hours of good charging time each morning as we broke camp. My solar panels were the last thing to be packed before mounting up.

About the second week, we had a spell when there just wasn’t enough sunshine to keep our batteries charged, partly due to our traveling through trees in the Chiricahuas. I ended up one day with all my GoPro camera batteries discharged, my iphone dead, and my DeLorme Explorer GPS almost dead. Out of necessity I tied the Nomad 13 to the back of my saddle as we traveled in open country from the Chiricahuas to San Simon, AZ. 20150429_114019The canvas cases for both units have small loops along outer borders which serve very well for tying them by saddle strings over my coat behind my saddle. While it did not charge very efficiently, due to not being able to always have it directly facing the sun, it was enough to get my iphone up to about a 30% charge after several hours. After that, whenever we traveled in open country I tied the Nomad to the back of my saddle and connected something to it, be it my iphone or the Guide 10 battery pack. In that way we were able to keep the most critical devices with at least a minimum charge the whole trip.

Another benefit of having both the Nomad and the Guide 10 was that the two can be connected together, or “daisy-chained”, by connecting the built-in cables, to increase their charging capacity. This greatly decreased the amount of time needed to completely recharge a device or top one off. When I set the panels out each morning or evening, they were daisy chained and I took pains to make sure the panels were situated to take maximum advantage of what sunshine was available. I found that even on cloudy days, there was sufficient sunshine to produce a trickle of electricity to get some charging done.

Guide 10 battery pack
Guide 10 battery pack

The item I always gave priority to keep at full charge was the battery pack. The battery pack contained four rechargeable AA batteries and had sufficient depth to bring my iphone 6 from dead to about 95% charge in a matter of about 3 hours. At that point the battery pack would be completely dead. I would make sure it was brought to full charge the following morning. My reasoning for this was that my iphone was the second most important electronic device in our inventory. It communicated with my DeLorme Explorer and provided viewable topographical maps by which we guided ourselves much of the time. Since we didn’t get all the paper maps we should have, we were very reliant on the iphone to keep us going the right direction, particularly at forks in the trails. It also served as a camera for still shots and the occasional short video when I didn’t have the GoPro out and ready. The battery pack gave us some insurance against days without sun and was used a number of times to keep the iphone alive until it could be charged by the solar panels.

Indicator light, USB output, two power inputs, LED flashlight function on the battery pack
Indicator light, USB output, two power inputs, LED flashlight function on the battery pack

One end of the battery pack has a well organized set of power inputs and outputs, as well as an indicator light and LED flashlight function. The USB power output allowed us to use the regular USB charging cords for charging all our devices. The inputs allow charging from the solar panels via a built-in cord or from a 110V wall outlet via a USB charger. When the battery pack is discharged, the indicator light shows solid red. As it charges it shows a blinking red light, which changes to a slow-blinking green, then a faster-blinking green, then finally a solid green when fully charged. The same indicators show as it discharges while charging a device. There is an on/off switch on the left side which also turns the LED flashlight on and off. While I never needed the LED flashlight, I can see where it might come in handy on occasion. The pack also comes with an adapter to recharge AAA batteries. The reserve power of the battery pack was a very important asset for us on the pack trip. In fact, I am considering purchasing a second battery pack.

The most important device we had was, of course, the DeLorme InReach Explorer, however the settings I had in place on it kept it going for up to five days before hitting the critical 20% charge level. Not only that, but it would come back to full charge within about two hours, when connected to both panels in direct sunlight. So, one good morning would have the GPS set to go for nearly a week.

I made sure all our devices were turned off each night and not turned back on until needed the following day. By doing so, and by ensuring that I set the two chargers out each morning, along with the additional charging time on the back of my saddle, the two solar chargers kept all our devices with at least a minimum charge the entire trip, except that one day when I let things get discharged. That one day taught me to become more diligent and organized in keeping things charged and utilizing the sun when it was shining. Additionally, as we took a rest day every Sunday, the solar panels were set out all day and adjusted periodically to maximize their effectiveness in the sunshine, while charging all our devices to maximum capacity (that is, when the sun was actually shining).

As for durability, while stored in my saddlebags, along with a number of other items – flashlights, binoculars, odds and ends, etc – these two solar charges survived multiple instances of my saddle horse laying down and attempting to roll over. I can’t think of many more effective ways to prove the durability of these little panels. After the trial they have been through, I am satisfied that I will have them for many, many more miles into the future.

wear spots on the plastic solar cell protectors
wear spots on the plastic solar cell protectors

The only thing I have found that would improve the durability and effectiveness of the Goal Zero solar chargers, in my opinion, would be to have a piece of flanel cloth, or similar material, cut to the size of the panels to keep between the clear plastic panels when the units are closed. I found that the clear plastic face of my units became scratched and had a somewhat fogged appearance in places, from the dust that got between them and scratched the surfaces while closed. I’m sure that decreases their efficiency, although I don’t know how much. This little improvement is something I will do for future use. I intend to recommend this as an improvement to the manufacturer.

My overall evaluation of the Nomad 13 and the Guide 10, used both individually and together, and I think I can honestly say they received a baptism by fire, so to speak, is that I consider them to be one of the most critical items of gear we had on the trip. That is not to say they were necessary for our survival, but they were absolutely necessary for the successful outcome of our trip. They proved themselves to be very durable under the most harsh conditions, surviving some pretty rough treatment and kept our critical electronic devices with at least a minimal charge throughout our month-long trip, thus ensuring we had the ability to contact the outside world at any time and that we were able to photographically document much of our trek for our followers.

Overall grade:  A+

 

The First Leg is Complete

It took us longer than we planned, and my estimated mileage was slightly off, but the first leg of our Mexico-to-Canada horse pack trip is complete.

IMG_1077

We departed Eagar, Arizona on Friday, April 10, with the help of family and friends who drove trucks and hauled trailers stuffed with horses and gear. We arrived at our designated starting point just before dark that evening. Dad and I stayed with the horses and my four-horse trailer for the night. One of our drivers headed home, while the others, my sister, brother-in-law, and nephew, got a room in Douglas. They returned the following morning to help us get packed up and started and to haul my truck and trailer back to Eagar.

The following morning, Saturday, April 11, Dad and I arose about sunup and began by feeding the horses and getting our gear out of the trailer and getting it sorted for packing. A couple of US Border Patrol Agents stopped by to visit. They had their horses an we invited them to ride with us a ways. They accepted the invitation, but before we were ready to start making tracks, they got called away to monitor a group of Mexican citizens that appeared to be preparing to illegally cross the border.

We started at the US/Mexico border about 18 miles east of Douglas, Arizona, near where Silver Creek crosses the border. It also happens to be where the monument to the Mormon Battalion stands.

Departure at the Monument for the Mormon Battalion
Departure at the Monument for the Mormon Battalion

For those who don’t know the history of the Mormon Battalion, during the Mexican-American War (1846-1848), the whole membership of the Church of Jesus Christ of Latter-Day Saints, also known as Mormons, were making their exodus from Missouri and points east to the Salt Lake Valley, which was then in Mexican territory. Certain individuals in the US Government feared the Mormons were fleeing the United States, due to the persecution they had experienced in Missouri and the lack of any help or redress from the US Government, and that they would become Mexican citizens and fight against the US. The US Government sent forces to stop the Mormons from leaving the US, but once they actually met with representatives of the church, their fears were assuaged. Brigham Young called for volunteers to join the US forces to help fight against Mexico and drive them from the territories later claimed by the US, including most of the current southwestern United States. More than 500 volunteers joined what became known as the Mormon Battalion, leaving their families and friends to make their way west, trusting to the Lord and the other members of the church to care for them.

The Mormon Battalion trekked from Council Bluffs, Iowa to San Diego, California without a single hostile engagement, as Mexican forces fled southward. The battalion raised the first American flag over Tucson, Arizona, opened a southern route for future wagon trains bringing immigrants to New Mexico, Arizona, and California, and was instrumental in the settlement of much of the southwest of the United States of America. Former members of the Mormon Battalion were among the first discoverers of gold in California, which initiated the famous California gold rush.

There are several monuments in the southwest to the Mormon Battalion, and being Mormons ourselves, we felt fortunate to have started our trek at one of these historic sites.

I will mention here our gratitude to the US Border Patrol out of Douglas and Safford, for their assistance in getting permission from several ranchers for us to cross their range. Their help in selecting routes, obtaining permissions, and even guiding us through the Chiricahua Mountains was invaluable to us and to the success of our endeavor. During the first several days of our trip we were visited by their officers several times and were always provided with good information and help for our trip. They also kept us posted on any groups of illegal aliens and suspected drug traffickers they were monitoring, and helped us select routes that kept us out of harm’s way. I will provide more detailed information about their help in future posts.

Our route took us north from the US/Mex border, following Silver Creek to the Bar-M Ranch, where we turned more northeast, crossing US Highway 80 just west of Boss Ranch Road. We followed Boss Ranch Road, crossing Boss Ranch by permission of the owner, making camp in Half Moon Valley. From there we tracked northeastward, up past High Lonesome Spring to Texas Canyon Road. We followed Texas Canyon Road to Rucker Canyon Road ,which we followed northeast to North Fork.

Heading up North Fork Trail in the Chiricahuas
Heading up North Fork Trail in the Chiricahuas

At North Fork we met with Joshua Jensen and Al Smith, who acted as our guides through the roughest part of the Chiricahuas and rode with us for three days. They took us up North Fork to the USFS lookout tower on Monte Vista Peak, then across the Crest Trail, and finally into Whitetail Canyon, through which we departed the Chiricahua Mountains. Both Josh and Al left us at Whitetail Canyon and Dad and I made our way northward to San Simon, where we crossed Interstate 10, passing underneath it traveling along San Simon Wash. We followed San Simon Wash northward toward Safford, until we had to leave it to find water for our horses. We ended up on a ranch road which took us past stock watering wells spaced about five miles, or so, apart and which led generally in the direction we needed to go. Thanks to Ron Mahan, of San Simon, for his help in selecting a favorable route through that dry desert area.

Nearing Safford, Az
Nearing Safford, Az

We made Safford on Thursday, April 23, which was about 3 days or so behind our planned schedule. We stopped at Joshua Jensen’s place, which he and his wife were gracious enough to allow us to use as a rest stop and re-supply station. While there we had Al Smith shoe our mule. Josh allowed us to use his pickup, so we headed into town for supplies. We also used the assistance of Al Smith to scout a suitable and safe route northward from Safford. With his help, as well as advice from the local Bureau of Land Management agents at the Safford office, we decided to avoid the problems and dangers of following the Gila and San Francisco Rivers, both of which are known to be choked with willows and are notoriously dangerous for livestock, due to quicksands. We determined to take a route that passed south of the Gila, skirting the Gila Box, passing south of Clifton by way of a power line service road and connecting with the Black Hills Scenic Byway. We crossed Highway 191 south of Clifton, then passed through Verde Lee and Loma Linda, finally hitting Rattlesnake Road, which took us into the mountains east of Clifton.

Rattlesnake Road eventually gave way to a USFS road which led up Rattlesnake Canyon to Rattlesnake Gap. This trail was, without any doubt, the steepest climb and roughest mile I have ever taken a horse over. It is one heck of a trail. Once over the top, though, it was a nice ride. I’ll detail that one later as well. I took a bit of video footage of it.

From Rattlesnake Gap, we followed the two-track ranch road, designated as USFS #215, I believe, which joined USFS #212 about 16 miles later, near Martinez Ranch, on the San Francisco River. We then followed the San Francisco west about two miles to the confluence of it and the Blue River, where we turned north to follow the Blue. The topo map showed that the canyon walls of the Blue, for the first two miles were pretty near sheer and quite narrow and that there would be no leaving the river bottom in that space. Not wanting to get trapped in a river bottom choked with willows, we took an old ranch trail out of the bottom up onto Sunflower Mesa. This turned out to be quite fortuitous, as we ended up finding a cowboy camp with a running spring, corral, and even a tent at Pat Corral on Pat Mesa. As it was Friday evening, the hands apparently had gone into town for the weekend. We spent a very comfortable camp night there. We left them a note, thanking them for the use of their camp. They responded through facebook, inviting us back for a visit. I hope we can make it one day. Thanks, Ruth Brockman and the crew from the Turkey Creek Ranch.

The following day we continued north on Pat Mesa, until we reached Pigeon Creek. There we were trying to make a choice whether to continue on the two-track we were following, which was rough and steep, or to go down Pigeon Creek to the Blue and follow the Blue up to Juan Miller Road. The route through the Blue would save us up to four miles, while the road was more sure. We decided to take the sure route and stick with the road.

As we came up out of Pigeon Creek, we met a hiker. As we talked, suddenly the both of us realized we had been in communication nearly 18 months earlier, through the Internet, about routes through this area. Brett Tucker owns the Grand Enchantment Trail website. He is a long-distance hiker who has documented a number of foot trails in New Mexico and Arizona. What a serendipitous coincidence that we would meet on this trail at this point. After talking a few minutes, Brett convinced us to head back down Pigeon Creek to the Blue and follow the Blue on up to Juan Miller Road. We did that, and soon found ourselves starting the most spectacular part of our ride. Thanks again, Brett.

IMG_1299The ride up the Blue was not an easy trail, because we were essentially making our own trail as we went. We found the occasional cow trail, but for the most part we were making our own way. However, surprisingly, the river bottom was neither choked, nor narrow. We had to do very little “brush-busting” to make our way through and the mile-and-a-bit to Juan Miller Road melted away pretty quickly.

Once we hit Juan Miller Road, the only east-west thoroughfare through this part of Arizona, we headed west to hit a four-wheel-drive-only two-track that follows the hills above the Blue northward for about three miles or so, to the Fritz Ranch, an abandoned historic ranch now owned by the USFS. From there we joined Blue Trail #101, which, if it actually existed, would have been a nice ride. However, the trail has not been maintained in many years and following it was impossible most of the time. It was more like following cow trails, and, in fact, probably was exactly that. Again, the river bottom was wide and we had to do little brush-busting. The trail was a little rough on the horses, due to having to follow the river bed at times, where the river rocks made footing uneven and tricky, but at least it was rather level.

About a half mile up the Blue from Fritz Ranch, we made camp Saturday evening and there we stayed for our Sunday rest. It was a nice camp, plenty of grass for the horses, and good water for us as well. We learned to cherish our Sunday rests. They were very important, not only for ourselves, but especially for our stock.

The following Monday we continued up the Blue, enjoying some spectacular scenery along the way. We made 26 miles that day and reached our rest station at the cabin of Dick and Jean Goodman, near the old Blue Post Office, long after dark. Dick and Jean treated us to some excellent rest and even better food. Dick made arrangements for our horses in the corrals of a neighbor. We rested again on Tuesday, which was sorely needed after the previous day’s ride.

Coming out of the Blue on Red Hills Road
Coming out of the Blue on Red Hills Road

On Wednesday we headed north again, on the Red Hills Road. We contemplated taking the Red Hills Trail, but after the Wallow Fire a few short years ago, the best information we had indicated the trails from the Blue to the top were un pretty poor condition, and we didn’t want to have to spend time hacking our way to the top, about 4,500 feet above the river bottom.

We reached the top in the late afternoon and made camp near a set of corrals just south of Beaverhead on highway 191. A friend had left us a bale of hay at the corrals, which was a welcome supplement to our horse feed, after such a hard climb. Thanks Jimmy Joy.

This was one of the nicest camps we made during the trip and we celebrated with a campfire, one of three we made during the entire trip (all our cooking was done on a single-burner propane stove). Our elevation was about 8,500 feet, as I recall. The following morning I was treated to watch about 8 elk pass calmly through the woods near our camp.

Camp at the corrals on Highway 191
Camp at the corrals on Highway 191

From that camp, we followed USFS #26 Road for about 10 miles, where it dead-ended into #24 Road. We followed #24 north to #25J, where we took that road as a means of getting off #24, which is one of the main roads through the White Mountains of Arizona. We found a nice camp with a spring near by for the horses. The night was cold at over 9,000 feet, and we got rained on during the night. In the morning there was ice on our tarps. Still it was one of the nicest camps of our trip, meriting a campfire for the evening rest.

Out on top, White Mountains
Out on top, White Mountains

The following day we made the remaining 22.5 miles into Eagar, arriving in the early evening before dark. We had pushed hard during the day, to outrun the weather moving in. We heard thunder and had a bit of snow fall on us. At over 9,000 feet elevation, cold weather is nothing to mess with. Our horses were tired as we made our way down into Eagar. We turned them loose in my 20 acre pasture for a well-deserved rest and headed to my parents’ home.

The first leg of the trip was over. By my GPS we traveled 355.2 miles. It took us 28 days – four weeks to the day.

Now for decision time.

This first leg of our Mexico-to-Canada pack trip was designed to be a “shake-out” for us. Our plan was to take our rest here in Eagar, evaluate ourselves, our horses, and our gear, then make decisions and adjustments for the rest of the trip. We hoped to continue our trip after a few days’ rest.

We learned a lot during this first 355 miles. We learned that we had grossly overestimated our travel miles per day and underestimated the miles of our route. We now know that 15 miles per day is a realistic figure to plan on. As for our route going forward, much of our travel will be on the Arizona Trail, which is fully documented for mileage, somewhat maintained, and planned out, and the roughest part of our trip is now behind us. However, we are currently more than seven days behind our projected schedule, which means our plans for crossing the Grand Canyon are not going to work out. I’m going to have to cancel the reservations at Mather Campground and reschedule.

We learned that my traveling companion, Clancy, my Blue Heeler, simply cannot make the miles. He’s good for a day or two, but he simply cannot make multiple days of 15-20 miles. I ended up having to carry him on my horse several days, which caused sore backs on my Fox Trotters. We ended up sending him home with my mother from Dick’s place on the Blue. Clancy will have to miss out on the rest of the trip.

We learned that at least two of our horses are not the right horses for this kind of pack trip. The Quarter Horse mare I borowed got saddle sores right off and no matter how lightly we loaded her, we could not get her over them. She’s going to have some healing to do. My Fox Trotter mare, Lizzy, has a very fast walk and she loves to really move out, which I love, but her motion as she walks causes our pack saddle rigging to rub sores on her. Once her back got sore while she was under my riding saddle, we couldn’t even pack her lightly, because the pack saddle rigging would rub her raw in places. We sent the two mares to my pasture in Eagar from Dick’s place on the Blue. Thanks Kelly LeSueur, for coming to pick them up.

We learned that with four pack horses, there simply isn’t any way for us to break camp in the morning in less than 4 hours, costing us a lot of miles on the trail each day and a lot of extra work. While it was necessary for us to haul feed with us (we hauled up to 400 pounds of pelletized feed at a time) in the low desert areas of southern Arizona, once we got up into the higher latitudes and elevations, there was plenty of grass for the horses. We hope we can continue the trip with four horses, rather than six.

We had a couple of near disastrous wrecks during our trip, one of which eventually resulted in one of our best horses turning up with a limp the last 1/2 mile going into Eagar. Additionally, my two Fox Trotters have lost weight in their backs, which makes their already prominent spines contact the underside of my riding saddle, where the skirts are laced together under the cantle. They both currently have sore backs. The two animals who have come through entirely unscathed are my mustang, Jimbo, and the mule, Honey. Both have trimmed down and look like true athletes, solid and strong. These two are the only animals ready to start the second leg of our trip at this time.

As for ourselves, Dad and I both feel healthier, if a bit tired, now, than when we started. Both of us lost quite a bit of weight, and our muscles have begun to “leg-up” and become stronger. We have come through this with no injuries, no rubs, no health problems of any kind. Just tired. Nothing a rest won’t cure. You might recall that I am 56 years of age and Dad turns 81 in about 12 days. I am amazed at Dad’s condition and resilience. He says he’ll be ready for the second leg of the trip next year.

Lastly, this trip has cost me nearly $20,000 so far. Help and sponsorships I was hoping for didn’t come through. I am simply out of money.

All of the above factors, and others yet unmentioned, have brought us to the decision to stop here at Eagar, Arizona for this year and continue the trip next year.

This will allow us to make the necessary adjustments we have identified, such as acquiring a couple of horses that will be better suited for the trip, making a few minor changes in our gear, make better plans and reservations for crossing the Grand Canyon, and allow me to go back to work to pay off money I have borrowed for this trip as well as to put together a money reserve for next year’s trip. I have already purchased most of the gear we will need, so the funds required will be quite a bit less than for this leg of the trip, but I may still need to look for another horse or two. This is the wise course for us. This is what we need to do if we want to eventually complete this trek from Mexico to Canada.

Our thanks go out to all who have supported us, particularly those who have actually put out their time, efforts, and money to help us. We are grateful for all the prayers that have gone up in our behalf. We can say unequivocally that we received continual help from above, even miraculous help at times, and we thank the Lord for this.

I maintained a journal during the trip, so stay tuned for future posts with much more detailed information about our trip, out experiences, and reviews of the gear we used. I have a lot of video footage as well as a multitude of photographs, however the Internet connection at my parents’ home is somewhat slow. I may have to wait until I get home to Utah to get them uploaded.

What a trip! What an experience! Can’t wait for next year! The hardest part of the trip is now done.

Buying the Necessaries for the Big Trip – DeLorme InReach Explorer

Last week I made arrangements to take out a fairly large loan from savings (thank you dear Linda) for the purchase of supplies and gear for the coming pack trip. Time is getting short, so Dad and I are evaluating our gear, repairing what needs it, replacing what we can’t repair, and buying what we don’t have.

I recently went on one of my favorite supplier online stores and put nearly $4,500 worth of gear on my “Wish List”. We’ll see how much of that I actually order. I have to admit that some of what is on that list is “want-to-have” stuff, rather than “need-for-the-pack-trip” stuff.

Yesterday I drove up to American Fork, to the Cabela’s store and spent nearly $1,000. I bought several items that I consider to be necessaries for the trip. I’ll address each item in detail and give my first impressions of them. During the trip and after it is done I’ll post a test-report on each and my opinions about them.

Recently, a good friend of my father, Dick Goodman, who will be helping us with logistics, advised us to buy a satellite phone, so we could call out if we had an emergency.  The idea that we could keep folks posted on our whereabouts and call out in case of emergency is a thought that had crossed my mind, but sometimes it takes someone else’s suggestion to bring an idea into focus. You have to remember that Dad and I both grew up before the advent of electricity…er, I mean cell phone and GPS technology, and sometimes we forget about things like that in our planning.

So, I went shopping at Cabela’s in Lehi, Utah to see what was available.

What I found was a number of Global Positioning Satellite (GPS) units by a couple of makers, several models of “Spot” emergency locators (which a friend had recommended), one model of satellite telephone, and several models of GPS units by DeLorme. After looking over the various capabilities, features, and options of a number of units, I settled on the DeLorme InReach Explorer, priced at $379.99.

DeLorme InReach Explorer
DeLorme InReach Explorer

The DeLorme InReach Explorer is a GPS unit, utilizing the Iridium GPS system. It has all the functionality of a regular GPS handheld, but also allows two-way texting via satellite. Not only that, but it also uploads details to my personal and Western Trail Rider facebook pages, as well as to DeLorme’s Map Share application*, accessed through their website, so all my friends and relatives can track our progress.

2015-03-01 12.42.10The one thing that might appear to be an issue with this unit is the small screen size. Maps? Nope, too small. Howsoever, this unit will talk to my iphone 6 as well as Android phones, by use of the Earthmate app that can be found through the App Store or any Android app site. The unit talks to the phones via Bluetooth, so cell coverage isn’t necessary. So, I will get all the map information on my iphone 6 in all its glory. In fact, through the Earthmate app, I am downloading the high-resolution map sets I will need to my phone as I type this post.

The SOS button and lock
The SOS button and lock

Once the unit is fully charged, one must follow the explicit instructions in the user’s manual provided with the unit for initiating and setting it up. Not following the instructions in order can cause problems that otherwise would easily be avoided. The first thing to know is NOT TO DO ANYTHING WITHOUT FIRST READING THE MANUAL! The unit has an emergency beacon/call button/function that will send out an emergency call if inadvertently activated. The button has a lock associated with it, so it is quite safely secured, however, if you are like most people, particularly men like me, when they get a new toy they immediately start pushing buttons to see what they do. If you unlock the button and press it, you might get emergency vehicles and rescue helicopters arriving at your location. More on the SOS function later.

As I said, the first step is to ensure the unit is fully charged. While the unit is charging, become familiar with the various buttons and functionalities of the unit by reading the manual. While you’re at it, download the Earthmate app to your phone from the Apple App Store or your favorite Android site. Step two is to create your DeLorme InReach account online and select an airtime plan subscription.

DeLorme offers a variety of plans under two headings: Freedom Plans and Annual Plans. Both offer various options for functions and payments, with the Annual Plan options being significantly reduced in price.

The Annual option, meaning you subscribe to regular monthly service and subscription payments for a period of one year, requires an initial subscription premium of $19.95. The lowest priced plan, called the “Safety Plan” runs $11.95 per month and includes the bare minimum of functionality: Unlimited SOS, 10 texts, 10-minute tracking intervals, and tracking points and location pings at ten cents each. The highest plan runs $79.95 per month and includes unlimited SOS, texts, tracking points, and pings, and 2-minute tracking intervals.  One can change plans at anytime for a fee of $24.95.

The Freedom Plan means you can activate your coverage at any time for the month or months you require. This plan requires an initial subscription premium of $24.95. The monthly fees are slightly higher than those of the Annual Plan, but offer the same options for functionality. For instance, the low and high plans under the Freedom Plans run $14.95 and $99.95 per month, respectively, compared to $11.95 and $79.95 under the Annual Plans. However, one can change the coverage under the Freedom Plans without fee simply by selecting that plan when activating. Changing from the Freedom to the Annual plans subscription requires payment of a change fee of $24.95.

Screenshot 2015-03-01 16.48.48I selected the Recreation Plan under the Freedom Plans subscription for my trip. It offers unlimited SOS, 40 texts, 10-minuted tracking intervals, and unlimited tracking points and pings. After the first leg of our trip I will decide whether to upgrade to the Expedition Plan, which offers unlimited texts. The Recreation Plan runs $34.95 per month, while the Expedition Plan runs $64.95 per month.

The main menu
The main menu

After creating your account and activating a plan, and making payment via credit card, you can set up your options and add contacts, set up your preset messages and responses for texting, and set up your “sharing”. The menus on the unit are easily navigated by use of the small thumb pad, using the button with the check-mark as the “enter” button. The “X” button is the “back” and “stop” button. You can also access and control the unit on the phone through the Earthmate app, including activating the SOS function.

The third step in the initiation and setup process is to  go outside and make sure you have a broad and clear view of the sky. Turn the unit on, point the antenna in the air and  wait. When you set up the DeLorme account online, DeLorme sends out a welcome message as a test to make sure the connection has been made. You will see a little green light on the face, which indicates you have a message waiting. If the light turns red, you have an urgent message waiting. Please note that this little light only indicates messages waiting and does not indicate satellite coverage for the GPS function! You will respond to the welcome text with a simple response text, which tests your unit’s ability to send texts. This process may take up to 20 minutes to finalize, so be patient.

Once you are able to send your text response, the GPS unit has been initialized and is ready for use. You are then ready to complete the setup process by calibrating the altimeter and digital compass functions. You are also ready to make the Bluetooth connection with your phone and start setting up your personalized functions and options on your Earthmate app.

I had trouble getting my iphone and DeLorme Explorer unit talking to each other. I finally decided to try connecting the unit to my Apple Macbook Pro by USB cable (included) to see whether an update option would appear when it connected. It did! The update took several minutes to complete. I noticed that the “message waiting” light blinked red and green during the update. Do not unplug your unit from the computer or shut down your computer until the update is completed! Once the update completed, my unit connected right up to my iphone 6.

The menu on the Earthmate App on my iphone 6
The menu on the Earthmate App on my iphone 6

Calibrating the altimeter is not a one-time thing. Although it will always be approximately correct by just using the GPS as reference, it is a good idea to reset the altimeter at the beginning of or during an adventure by finding a point at which the elevation is certain, such as at a trailhead where elevations are often shown on trail signs, and using that elevation to set the unit. You may also set the function by using barometric pressure readings from a reliable source nearby, such as airport weather reporting.

The compass is calibrated by initiating that function through the settings menu. After selecting “Calibrate Compass” you simply move the compass in a figure-8 pattern, making sure the antenna moves through all directions in reference to the ground several times until you hear a beep, indicating the process is complete. As with the altimeter, it is a good idea to recalibrate the compass at the beginning of each new trip.

The SOS function is activated by sliding the “lock” switch on the face of the unit to the left, exposing a red line, indicating the function is now available. By then pressing the SOS button, the function is activated, sending out SOS messages to GEOS, the DeLorme monitoring center, which will then dispatch rescue services to your location. The SOS function can also be activated through the menu, by selecting the SOS icon, then pressing the “enter” button (the one with the check-mark), or by using the phone app and selecting the SOS function from the menu. Use this only in time of true emergency, as this will set in motion a very expensive bunch of fast-turning wheels.

A map on my iphone 6 via the Earthmate app
A map on my iphone 6 via the Earthmate app

As I look through the maps on my iphone 6, the resolution is sufficient that I can see excellent topographical detail, however at the magnification level needed to see marked trails, the viewable area of the map is quite small. I find it difficult to be able to see where a particular trail goes, as one would be able to do on a map, without simply following it on the touch screen. While one can gain greater perspective by zooming out, the dashed-line marking trails disappears after only two clicks out. A larger screen would alleviate the problem proportionate to the size of the screen, but this issue is not a problem with the Explorer, it’s simply the size of my phone display. I am pretty old-fashioned and still feel more comfortable with a paper map in my hands, however, for the Mexico-to-Canada pack trip I have planned, the maps alone, at 7.5 minute size covering the selected route, would number over 100 and would cost more than $700. Not having to buy and carry all those maps is a benefit one cannot ignore and one for which I can happily deal with the little inconvenience of a small screen on my phone. I should mention that I believe the screen on my iphone 6 is as large or larger than the screens I saw on all the GPS units offered at Cabela’s, including the venerable Garmin Montana.

My overall impression so far, not having actually used the unit yet, is that the DeLorme Explorer is exactly what I need, not only for the impending pack trip, but for all my packing adventures for years to come. I will be able to store the information from my trips, mileage, speed, elevation, etc., for my blog posts, keep my followers updated on my progress during the trips, call for help in emergencies, and make the trail information available for others to use.

Moreover, the peace of mind it will give my wife and my mother while Dad and I are out on this pack trip, knowing we can communicate with them and call out in case of emergency at anytime, from anywhere, via text and emergency beacon with this unit, and the fact that we can keep them posted on our progress via text and facebook posts, is well worth the $379.99 price tag and the subscription price.

This was a good score in my book. Thumbs up!

Now, you’re probably asking yourself how we intend to keep this handy little unit, as well as our cell phones, charged up.

Stay tuned.

* I will provide the link to my Map Share on a separate post once the trip is underway. The Map Share link is specific to each trip logged by the InReach Explorer unit.

Red Mountain Trail, St. George, Utah

After a great day of riding into the southern part of Zion National Park, near Hurricane, Utah, I spent the following day, Saturday, with Jon Tanner, Michael George, Craig Sorensen, and a number of members of the Missouri Fox Trotting Horse Breed Association riding Red Mountain Trail, just northwest of St. George, Utah.

Parking area at Red Mountain Trail head
Parking area at Red Mountain Trail head

This trailhead is located just north of mile marker 15 on Highway 18. There is a very nice parking area with a restroom, which was built by the local Back Country Horsemen Association a few years ago, with the cooperation of the Bureau of Land Management. The parking lot was built to accommodate horse trailers and allows even large trailers room to park and maneuver in the lot. There is no running water and no electrical service, so you’ll need to consider that if you’re hauling horses from any distance to this trailhead. There are no parking fees, but I’m not sure if overnight camping is allowed. You’d have to check that with the local BLM office.

Once we got everyone together, we had about 31 riders, most mounted on Fox Trotters. There were at least two other groups, smaller than ours, starting on the trails at about the same time. There are several trails and plenty of room for all and we never bumped into any of the other groups while on the ride. The Red Mountain Trail makes a loop of about 6.7 miles, starting at one end of the parking area and ending at the other, so you can pick which direction you want to go. There are steel gates at either entrance, built to allow hikers, bicyclers, and horses, but not ATVs. As this area is actually outside the Snow Canyon State Park, dogs are allowed on the trails off-leash.

2015-02-21 10.41.48We headed out the south end of the parking area and got just outside the gate and waited while we gathered our forces. Once we got started, the group quickly separated into several smaller groups, all traveling the same direction. With a group of gaited horses, such as Fox Trotters, there are those who travel quite a bit faster than others, so those who wished to slow down a bit, and stay out of the dust trail, hung back a bit.

The terrain, for the most part, consists of very fine sandstone dust, juniper trees, manzanita, and sage. There are several parts of the trail that are pretty rocky, and a couple places that might present a challenge to the uninitiated rider,  but I would consider the trail to be in the category of fairly easy overall. Many of our horses, including mine, were barefoot and handled it very well.

About half-way through the trail loop, one suddenly comes upon the northern rim of Snow Canyon, which drops away about 1,400 feet in sheer cliffs from the trail. There are no walking paths and no guardrails, so one has to pay attention to things when going up to the edge for a look or for photos.

Snow Canyon, St George, Utah
Snow Canyon, St George, Utah

What one sees here is breathtaking and cannot be adequately captured on my little iphone 6 camera. I did my best, but this is a sight one must take a look at in person to really experience it.

We broke there for lunch and sat around enjoying stories from some of the more experienced riders in the group, which was enjoyable all in itself. This area is primitive, so don’t expect any picnic tables or trash cans.

After a restful half-hour or so, we mounted up and headed out to finish the loop. The entire ride took under 3 hours, covered 6.7 miles, and was quite easy on the horses and riders. On the way out, there are at least two trails that diverge from the main, so one must pay attention to make sure he/she is tracking where they want to go. The trail markers were not entirely clear as to which way was back to the parking area. Having someone along who actually knows the trail is nice, but not absolutely necessary, as one would have to try pretty hard to get lost. Just keep tracking east and eventually you’ll hit the power lines and Highway 18. Then just look around and you will be able to find your way back to the parking area, since the area is almost clear of trees for at least a hundred yards from the highway.

2015-02-21 12.04.25This was a short ride and would make a good “filler” ride for some extra time during a weekend trip to the area. There are a number of other similar trails in the area, so one could actually fill up a weekend, and more, hitting them in turn. Each trail around the Snow Canyon area holds its own particular spectacular views and adventures.

 

Enjoy the photo gallery.

Coal Pits Wash Trail, Hurricane, Utah

Several weeks ago, I was invited by Jon Tanner to fill a slot in his trailer for a ride down to the Saint George area of southern Utah for a couple days. He was going down to meet members of the local Missouri Fox Trotting Horse Breed Association for a couple days of riding. After he twisted my arm a while, I agreed (that’s exactly how it happened, right Jon?).

Jon picked up me and my horse, Ranger, Friday morning at 6:30am and we headed south. We arrived at the designated meeting site, the Washington County Equestrian Center at Hurricane, Utah at about 10:30am. I was surprised to see that about 30 riders showed up. I had no idea there would be that many. Due to the large size of the group, and that some wanted to see one area while others wanted to see another, the group split for the day’s ride.

Jon and I followed Janet Carver to the Coal Pits Wash trailhead, located about 8 miles and a bit east of Hurricane on Highway 9. The parking area is a wide spot on the north side of the road just before the highway turns a bit north. I don’t recall seeing a road sign announcing the location, so you just have to look for it. The parking area will hold several trucks and 4-horse trailers and there is room for a turn-around, if necessary.

Parking at the trailhead
Parking at the trailhead

The trailhead is easy to see. There is a gate that marks the trail. Once through the gate (make sure you close it after passing through) the trail is easy to follow. It tracks generally northward. Just a short distance up the trail, you will cross into Zion National Park. Although there are only trail markers where different trails intersect, it’s not terribly difficult to see where others have gone before. In some areas, where the trails my diverge or where the rocky ground sort of hides the trail, you will find rocks stacked to mark the trail. Also, this trail is open to horse,  bicycle, and foot traffic, so be aware of other travelers and be courteous to all.

Heading north from the trailhead
Heading north from the trailhead

The trail heads north into a broad canyon where the traveling is fairly easy. The trail has a slow, steady climb, crosses through the creek several times, but more often stays up on the bench on the east side of the creek. It is a good idea to water your horses in the creek, as once you start your climb up out of the wash, there is likely to be little water on the trail.

There are several deep cuts in the bench, from erosion, that one must either go around or cross through. Which you choose to do is up to you and your horse; a couple of the cuts were pretty steep and narrow. In fact, coming back we simply jumped a couple of them, rather than taking the long way around. This is an area in which an inexperienced rider and/or horse can get themselves into trouble, so don’t bite off more than you can chew, so to speak.

Climbing the Coggins Trail
Climbing the Coggins Trail

On up the trail about two miles, you will come to the intersection of the Coggins Trail. This trail leads up a steep switch-back that climbs very quickly up out of Coal Pits Wash and up through a saddle. This trail, while not particularly challenging for the average horse, may be quite intimidating for the uninitiated rider. The climb is steep and the slope falls steeply away from the narrow trail. As you climb higher on the hillside, you will find some pretty spectacular views of the area you have just passed through. If you will click on the photo below and enlarge it, you will see a string of riders from our group about three-quarters of the way up the hillside.

The climb up out of Coal Pits Wash on the Coggins Trail.
The climb up out of Coal Pits Wash on the Coggins Trail.

The trail then goes over a saddle into some fairly level and easy-riding areas that track generally east-by-northeast through juniper and pinon trees toward beautiful red and white cliffs. At this point you are above the wash and will find little water, other than the occasional puddle left over from recent rains.

2015-02-20 14.52.53At this point we tracked generally toward the cliffs, following a well-marked trail – marked by traffic, rather than signs – until we felt we had gone far enough and turned around. We found2015-02-20 15.17.34

a small, sort of mini-slot canyon off to one side of the trail that we followed up a ways. It added interest to the ride, but was just a short diversion that required either a return trip the same way we entered, or a little bushwhacking to make our own way over the ridge back to the trail. We chose the bushwacking.

2015-02-20 15.23.04Also, along the way up on top, keep your eyes open for petrified wood, such as the log laying across the trail in the photo to the left. I’m told there are dinosaur tracks somewhere in the area, but we didn’t take the time to look for them. I’m sure you could get more information as to where they are located from park rangers (we didn’t see any rangers during our ride).

We followed the same path out that we followed in, however one has to pay attention, as there are several trails that diverge from the main trail. As mentioned, there are trail markers at points were marked trails diverge from the main, however, sometimes it is difficult to determine where the trails actually diverge. At one point we missed a turn and went several hundred yards on the wrong trail before we realized we didn’t recognize the terrain. We simply went back to the last marker and found the trails diverged on a large, flat rock and we simply missed the trail. Once we recognized our mistake it was easy to see the small stack of rocks that marked the trail we wanted.

2015-02-20 16.29.21Although we traveled out on the same trail we followed in, the views were as spectacular as before. Each direction offers its own views and perspectives and there is nothing lost in following the same trail out.

Our ride took about four hours and covered around seven miles. It was an excellent way to spend a nice February afternoon. By the way, the temperatures were in the high-sixties, with clear blue skies for us. In the summertime you can expect temperatures above 100 degrees. Wintertime is the time to see this area by horseback.

Enjoy the photo gallery.